| Grating Top clip 316SS Mill Pattern A-F remove | WK3414 Gridwalk Expanded Metal Sheet: 85 x 24mm Openings remove | Grating Pattern B 25×5 Loadbar, 995x5800mm remove | R09540 Perforated Metal Sheet: 9.5mm Round, 40% Open Area remove | MH0717 Fine Woven Wire Mesh Per Metre: 7.1 x 0.71 Openings remove | M00620 Fine Woven Wire Mesh Per Metre: 3.33 Openings remove | Grating Pattern A 25×5 Loadbar, 995x5800mm remove | Grating Pattern A 20x5 Loadbar, 995x5800mm remove | MET Expanded Metal Edge Trims, Galvanised Steel remove | Grating Pattern C 25x3 Loadbar, 1003x5800mm remove | M008185 Fine Woven Wire Mesh Per Metre: 2.08 Openings remove | Grating Pattern C 25x5 Loadbar, 1005x5800mm remove | Gridwalk Walkway Fixing Clip: To Suit WK4514, WK3022, WK4519, WK3028 remove | WK4519 Gridwalk Expanded Metal Sheet: 96 x 32mm Openings remove | M8 Galvanised, Anti-vibration Locknut remove | M00821 Fine Woven Wire Mesh Per Metre: 2.38 Openings remove | Grating Pattern A 40x5 Loadbar, 995x5800mm remove | M00721 Fine Woven Wire Mesh Per Metre: 2.83 Openings remove | M01024 Fine Woven Wire Mesh Per Metre: 1.98 Openings remove | R03231 Perforated Metal Sheet: 3.2mm Round, 31% Open Area remove | Gridwalk Walkway Fixing Clip: To Suit WK3414, WK2517 remove | WK3022 Gridwalk Expanded Metal Sheet: 53 x 15mm Openings remove | M01226 Fine Woven Wire Mesh Per Metre: 1.66 Openings remove | MH2411 Fine Woven Wire Mesh Per Metre: Openings remove | Gripspan Hold Down Clamp remove | M00824 Fine Woven Wire Mesh Per Metre: 2.61 Openings remove | WK3028 Gridwalk Expanded Metal Sheet: 50 x 12mm Openings remove | 1520 Expanded Metal Sheet: 29 x 12mm Openings remove | R02141S4091220 Perforated Metal Per Metre: 2.1mm Round, 41% Open Area remove | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
| SKU | C100SM | WK3414main | B255main | R09540 | MH071710S41500 | M00620S41525 | A255MAIN | A205 | METmain | C253main | M008185S41270 | C255main | WK45-CLIP | WK4519-1200X3000 | C304MG | M00821S41220 | A405main | M00721S41525 | M01024S41524 | R03231 | WK34-CLIP | WK3022 | M01226S41524 | MH24110S41000 | HDC65 | M00824S41525 | WK3028main | P1520 | R02141S4091220 |
| Price | $4.16 | $244.93 – $613.20 | $904.69 – $1,479.11 | $236.30 – $1,033.55 | $187.00 | $127.64 | $799.09 – $2,493.98 | $685.00 – $1,029.51 | $10.62 – $25.80 | $445.38 – $648.38 | $215.98 | $659.31 – $2,087.44 | $5.49 | $411.24 | $0.67 | $111.33 | $1,304.16 – $3,544.18 | $150.36 | $86.96 | $141.45 – $393.31 | $10.13 | $323.58 – $780.82 | $56.00 | $152.38 | $16.91 | $73.42 | $599.04 – $1,253.71 | $163.30 – $220.06 | $258.04 |
| Availability | Available on backorder, typically 5 working days | Available on backorder, typically 14 days. | Available on backorder, typically 14-16 weeks | 8 in stock (can be backordered) | Available on backorder. | Available on backorder. | 30 in stock (can be backordered) | 307 in stock (can be backordered) | 18 in stock (can be backordered) | 103 in stock (can be backordered) | 15 in stock (can be backordered) | 6 in stock (can be backordered) | 48 in stock (can be backordered) | 303 in stock (can be backordered) | 26 in stock (can be backordered) | 7 in stock (can be backordered) | 70 in stock (can be backordered) | 18 in stock (can be backordered) | 54 in stock (can be backordered) | ||||||||||
| Add to cart | |||||||||||||||||||||||||||||
| Description | 316 Stainless Steel grating top clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C200SM (bottom clip), & C301SM (bolt and nut). | Webforge Locker fine woven wire mesh with 0.71mm Stainless Steel 304 wire and 7.1 x 0.71mm openings. Roll is 1500mm wide and cut to the meterage ordered, pricing per metre. | Woven from 0.9mm Stainless Steel 304 wire with 3.33mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Woven with 1.1mm Stainless Steel 304 wire with 2.08mm openings. Roll is 1270mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with Gridwalk beginning WK30 and WK45 | Webforge Locker Gridwalk WK4519 is expanded metal walkway with mesh openings of 96 x 32mm. Available in a 1200 (LWM) x 3000mm (SWM) mild steel (untreated) sheet. | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. | Woven with 0.8mm Stainless Steel 304 wire with 2.38mm openings. Roll is 1220mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Woven with 0.8mm Stainless Steel 304 wire with 2.83mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | 0.56mm Stainless Steel 304 wire and 1.98mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | 0.45mm Stainless Steel 304 wire and 1.66mm openings. Roll is 1524mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker fine woven wire mesh with 0.35 x 0.37mm Stainless Steel 304 wire and 24 x 110mm openings. Roll is 1000mm wide and cut to the meterage ordered, pricing is per metre. Max possible single length 30m. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Woven with 0.57mm Stainless Steel 304 wire and 2.61mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | ||||||||||||||
| Content | 316 Stainless Steel grating top clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C200SM (bottom clip), & C301SM (bolt and nut). All grating products. | Webforge Locker, Gridwalk WK3414 is expanded metal walkway with mesh openings of 85 x 24mm. Available in mild steel (untreated) or a hot dip galvanised finish, as well as a range of sheet sizes. | B255 is a walkway grating with spacing’s of 30 x 50mm c/c on loadbars and crossrods. These panels are available in mild steel (untreated) or a hot dip galvanised finish with a plain surface. | Webforge Locker R09540 is a general purpose perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 40%. Available in a choice of materials and thicknesses | Webforge Locker fine woven wire mesh with 0.71mm Stainless Steel 304 wire and 7.1 x 0.71mm openings. Roll is 1500mm wide and cut to the meterage ordered, pricing per metre. | Webforge Locker fine woven wire mesh with 0.9mm Stainless Steel 304 wire and 3.33mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | A255 is a walkway grating with spacing’s of 30 x 100mm c/c on loadbars and crossrods. These panels are available in aluminium and mild steel untreated or a hot dip galvanised finish with a plain or serrated surface. | Webforge Locker A205 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Webforge Locker MET is a general purpose expanded metal trim. Available in a range of gap sizes, to suit your expanded profile. | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Webforge Locker fine woven wire mesh with 1.1mm Stainless Steel 304 wire and 2.08mm openings. Roll is 1270mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker C255 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an aluminium mill finish with a plain surface and in mild steel with a plain or serrated surface in an untreated of a hot dip galvanised finish. All grating products. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with Gridwalk beginning WK30 and WK45 | Webforge Locker Gridwalk WK4519 is expanded metal walkway with mesh openings of 96 x 32mm. Available in a 1200 (LWM) x 3000mm (SWM) mild steel (untreated) sheet. | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. All grating products. | Webforge Locker fine woven wire mesh with 0.8mm Stainless Steel 304 wire and 2.38mm openings. Roll is 1220mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. . | Webforge Locker A405 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods respectively. Available in aluminium (mill finish) or mild steel with an untreated or hot dip galvanised finish and a choice of surface finishes. | Webforge Locker fine woven wire mesh with 0.8mm Stainless Steel 304 wire and 2.83mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker fine woven wire mesh with 0.56mm Stainless Steel 304 wire and 1.98mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker R03231 is a general purpose perforated metal sheet with 3.2mm round holes in a staggered pattern. Open area is 31% Available in an aluminium or Galvanised steel. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | Webforge Locker Gridwalk WK3022 is a heavy duty expanded metal walkway with mesh openings of 53 x 15mm. Available in a mild steel (untreated) and a hot dip galvanised finish, as well as a range of sheet sizes. | Webforge Locker fine woven wire mesh with 0.45mm Stainless Steel 304 wire and 1.66mm openings. Roll is 1524mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker fine woven wire mesh with 0.35 x 0.37mm Stainless Steel 304 wire and 24 x 110mm openings. Roll is 1000mm wide and cut to the meterage ordered, pricing is per metre. Max possible single length 30m. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Webforge Locker fine woven wire mesh with 0.57mm Stainless Steel 304 wire and 2.61mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker, Gridwalk WK3028 is a heavy duty expanded metal walkway with mesh openings of 50 x 12mm. Available in a 1200 (LWM) x 3000mm (SWM) sheet, in a mild steel (untreated) or a hot dip galvanised finish. | Webforge Locker 1520 is a general purpose expanded metal sheet with mesh openings of approximately 29 x 12mm and a total open area in the range 68-74% (raised) or 60% (flat). Available in a variety of materials. | Webforge Locker R02141 is a general purpose, perforated metal roll with 2.1mm round holes in a staggered pattern. Open area is 41%. Available in a 1220mm wide roll. Material cut to the meterage ordered, price is per metre. |
| Weight | 0.1 kg | N/A | N/A | N/A | 2 kg | 3.1 kg | N/A | N/A | N/A | N/A | 6.09 kg | N/A | 0.26 kg | 68.4 kg | 0.05 kg | 3.17 kg | N/A | 4.27 kg | 2 kg | N/A | 0.15 kg | N/A | 1.3 kg | 3.3 kg | 0.5 kg | 0.397 kg | N/A | N/A | N/A |
| Dimensions | N/A | N/A | 995 × 5800 × 25 cm | N/A | N/A | N/A | 995 × 5800 × 25 cm | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Angle | |||||||||||||||||||||||||||||
| Colour | |||||||||||||||||||||||||||||
| Drill | |||||||||||||||||||||||||||||
| Hole Pitch (mm) | 14.30 | 5.56 | 3.10 | ||||||||||||||||||||||||||
| Hole Shape | Round | Round | Round | ||||||||||||||||||||||||||
| Hole Size (mm) | 9.50 | 3.20 | 2.06 | ||||||||||||||||||||||||||
| Kickplate Orientation | |||||||||||||||||||||||||||||
| LWO (mm) | 85 | 96 | 53 | 50 | 29 | ||||||||||||||||||||||||
| Material | Stainless Steel 316 | Hot Dip Galvanised, Mild steel (untreated) | Mild Steel | Aluminium, Electro Galvanised, Galvanised Steel, Stainless Steel 304 | Stainless Steel 304 | Stainless Steel 304 | Aluminium, Mild Steel | Mild Steel | Mild Steel | Mild Steel | Stainless Steel 304 | Aluminium, Mild Steel | Galvanised Steel | Mild Steel | Galvanised Steel | Stainless Steel 304 | Aluminium, Mild Steel | Stainless Steel 304 | Stainless Steel 304 | Aluminium, Galvanised Steel | Galvanised Steel | Hot Dip Galvanised, Mild steel (untreated) | Stainless Steel 304 | Stainless Steel 304 | Galvanised Steel | Stainless Steel 304 | Hot Dip Galvanised, Mild steel (untreated) | Hot Dip Galvanised, Mild Steel, Mild Steel (Flattened) | Stainless Steel 304 |
| Material Finish | Hot Dip Galvanised, Untreated Mild Steel | Hot Dip Galvanised, Untreated Mild Steel | Hot Dip Galvanised, Untreated (Mill finish) | ||||||||||||||||||||||||||
| Material Thickness (mm) | 5.00 | 1.00, 1.50, 1.60, 2.00, 3.00 | 1.60 | 5.00 | 0.80, 1.20, 1.60, 2.00 | 5.00 | 5.00 | 2.00 | 0.90 | ||||||||||||||||||||
| Mesh Aperture (mm) | 7.1 x 0.71 | 3.33 | 2.08 | 2.38 | 2.83 | 1.98 | 1.66 | 24 x 110 | 2.61 | ||||||||||||||||||||
| Overall Height (mm) | 13 | 7.2, 9.2, 11.2, 13.2 | 21 | 13 | 15 | 5.1 | |||||||||||||||||||||||
| SWO (mm) | 24 | 32 | 15 | 12 | 12 |
Shopping Cart