Availability | 16 in stock (can be backordered) | 30 in stock (can be backordered) | Available on backorder. | Available on backorder, typically 14 days. | | | 307 in stock (can be backordered) | Available on backorder, typically 36 working days | Available on backorder. | 303 in stock (can be backordered) | | Available on backorder. | Available on back order, typically 5 working days | Available on backorder, typically 5 working days | Available on backorder. |
Description | Woven with 1.25mm Stainless Steel 304 wire with 1.93mm openings. Roll is 1550mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Woven with 1.1mm Stainless Steel 304 wire with 2.08mm openings. Roll is 1270mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | | | | | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with Gridwalk beginning WK30 and WK45 | 3820F Mild Steel (untreated) flattened, 2400 (LWM) x 1200mm (SWM) Sheet. | | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | | | Horizontial closure bend in a galvanised finish. Suitable for use with the Monowills LINK system. | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results in 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | |
Content | Webforge Locker fine woven wire mesh with 1.25mm Stainless Steel 304 wire and 1.93mm openings. Roll is 1550mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker fine woven wire mesh with 1.1mm Stainless Steel 304 wire and 2.08mm openings. Roll is 1270mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge A253 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | B325 is a walkway grating with spacing’s of 30 x 50mm c/c on loadbars and crossrods. These panels are available in mild steel (untreated) or a hot dip galvanised finish with a plain surface. | Webforge Locker 5030 is a general purpose expanded metal sheet with mesh openings of approximately 83 x 41mm and a total open area in the range of 77% (flat) & 76-83% (raised). Available in Mild Steel raised and flattened. | Platform stanchions in aluminium (mill finish), with a range of drilling options to suit the specifications of your job. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with Gridwalk beginning WK30 and WK45 | Webforge Locker 3820F is a flattened general purpose expanded metal sheet with mesh openings of approximately 62 x 28mm and a total open area of 83%. | Monowills LINK side stanchion, fully assembled, in galvanised steel, can be supplied as a std drill or one side only and with a kickplate mounting bracket if required. All handrails products. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | Angle Mount Stanchions in aluminium, available in mill finish and in a variety of angles, to suit the needs of your project. | Side conveyor stanchion in mild steel, available in an untreated or hot dip galvanised finish. Available in a range of different drill options. All handrails products. | Horizontal closure bend in a galvanised finish. Suitable for use with the Monowills LINK system. All handrails products. | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | Webforge Locker A205 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. |