Description | Woven with 0.8mm Stainless Steel 304 wire with 2.83mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Woven from 1.25mm Stainless Steel 304 wire with 2.98mm openings. Roll is 1550mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | | | | | Mild Steel grating bottom clip suitable for use on grating patterns A through to F. All grating products. | |
Content | Webforge Locker fine woven wire mesh with 0.8mm Stainless Steel 304 wire and 2.83mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker fine woven wire mesh with 1.25mm Stainless Steel 304 wire and 2.98mm openings. Roll is 1550mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge C205 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in mild steel (untreated) and a hot dipped galvanised finish with a plain surface. All grating products. | Cored stanchion, available in an untreated or hot dip galvanised finish, drilled as standard. All handrails products. | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range of 66% (flat) and 67-74% (raised). Available in a range of different options to suit the needs of your project. | Webforge Locker A205 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Mild Steel grating bottom clip suitable for use on grating patterns A through to F. All grating products. | Webforge Locker A405 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods respectively. Available in aluminium (mill finish) or mild steel with an untreated or hot dip galvanised finish and a choice of surface finishes. |