Description | 0.71mm Stainless Steel 304 wire and 1.8mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | | | LV16 is an expanded aluminium louvre sheet, 2400 (LWM) x 1200mm (SWM) Sheet. | | | | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. | | | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Mild Steel grating clipset suitable for use on grating patterns A through to F, (Set consists of Top, Bottom, and 65x8mm bolt with nyloc nut). | |
Content | Webforge Locker fine woven wire mesh with 0.71mm Stainless Steel 304 wire and 1.8mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker C405 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Platform stanchion in mild steel, available in an untreated or hot dip galvanised finish. As well as a range of drilling options and/or with a single slot kickplate bracket, at differing heights and orientation to suit the specifications of your job.. All handrails products. | Webforge Locker LV16 is an expanded metal louvre sheet, commonly used for sun screening. Louvre openings are approximately 33 x 4mm and a total open area in the range 12-60%. | Side Angle Right stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | Webforge Locker F255 is a walkway grating with spacings of 60 x 50mm c/c on loadbars and crossrods. These Mild Steel panels are available in an Untreated or Hot Dip Galvanised finish with a plain surface. All grating products. | Monowills LINK side conveyor stanchion, fully assembled in galvanised steel, supplied as a std drill or one side only, also available with a kickplate mounting bracket if required. All handrails products. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | Webforge A323 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. All grating products. | Webforge Locker Architectural wire mesh sheet with 35mm openings and 4mm diameter wire. | Gripspan planks are the superior choice for walkways and platforms. They are lightweight, with exceptional spanning capability, whilst also being non-slip. They also pass the 15mm ball test set under AS1657 making them the ideal choice for overhead use. This plank is 5.8m long, galvanised and available in a 1.2mm thickness, 225mm wide with a serrated surface. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Mild Steel grating clipset suitable for use on grating patterns A through to F, (Set consists of Top, Bottom, and 65x8mm bolt with nyloc nut). | Monowills LINK platform stanchion, fully assembled in galvanised steel, available as std drill or drilled one side only, a kickplate mounting bracket can also be added if required. All handrails products. |