Content | Webforge Locker fine woven wire mesh with 0.42mm Stainless Steel 304 wire and 1.17mm openings. Roll is 1220mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker Gridwalk WK2517 is expanded metal walkway with mesh openings of 42 x 16mm. Available in a range of different sheet sizes, and material finishes. | Stainless steel grating screw and bolt suitable for use with our FRP minimesh panels, to be used in conjunction with and a C139SM Top Clip | A255 is a walkway grating with spacing’s of 30 x 100mm c/c on loadbars and crossrods. These panels are available in aluminium and mild steel untreated or a hot dip galvanised finish with a plain or serrated surface. | Webforge Locker MET is a general purpose expanded metal trim. Available in a range of gap sizes, to suit your expanded profile. | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker 1220 is a general purpose expanded metal sheet with mesh openings of approximately 22 x 9mm and an open area in the range of 64-71% (raised) or 62% (flattened). Available in a range of materials. | Webforge C205 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in mild steel (untreated) and a hot dipped galvanised finish with a plain surface. All grating products. | Rail bends in mild steel, available in an untreated or a galvanised steel finish, as well as a range of angles to suit the specifications of your job (Bends can be used as a top rail with Webforge Locker Monowills Welded and as both top and mid rail with the 32NB LINK stanchions). | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in an Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker C255 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an aluminium mill finish with a plain surface and in mild steel with a plain or serrated surface in an untreated of a hot dip galvanised finish. All grating products. |