Description | | Woven from 0.9mm Stainless Steel 304 wire with 3.33mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | | 0.56mm Stainless Steel 304 wire and 1.8mm openings. Roll is 1520mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | | Stainless Steel bolt and nut, suitable for use with the C100SM and C129SM top clip. All grating products. | | Mild Steel grating top clip suitable for use on grating patterns A through to F. All grating products. | | | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results in 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | | 316 Stainless Steel grating top clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C200SM (bottom clip), & C301SM (bolt and nut). |
Content | Webforge Locker Gridwalk WK3022 is a heavy duty expanded metal walkway with mesh openings of 53 x 15mm. Available in a mild steel (untreated) and a hot dip galvanised finish, as well as a range of sheet sizes. | Webforge Locker fine woven wire mesh with 0.9mm Stainless Steel 304 wire and 3.33mm openings. Roll is 1525mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker Gridwalk WK4514 is expanded metal walkway with mesh openings of 96 x 32mm. A range of sheet sizes are available, as well as your choice of mild steel (untreated) or hot dip galvanised finish. | Webforge Locker fine woven wire mesh with 0.56mm Stainless Steel 304 wire and 1.8mm openings. Roll is 1520mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker, Gridwalk WK3028 is a heavy duty expanded metal walkway with mesh openings of 50 x 12mm. Available in a 1200 (LWM) x 3000mm (SWM) sheet, in a mild steel (untreated) or a hot dip galvanised finish. | Stainless Steel bolt and nut, suitable for use with the C100SM and C129SM top clip. All grating products. | Webforge Locker F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated (mild steel) with a plain surface. | Mild Steel grating top clip suitable for use on grating patterns A through to F. All grating products. | Side Offset stanchion, 110mm in mild steel, available in an untreated or hot dip galvanised finish. As well as the option of a single slot kickplate bracket at differing heights and orientation to suit the specifications of your job. All handrails products. | Webforge Locker Architectural wire mesh sheet with 25.4mm openings and 3.15mm diameter wire, available in a range of materials. | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | Webforge Locker 1520 is a general purpose expanded metal sheet with mesh openings of approximately 29 x 12mm and a total open area in the range 68-74% (raised) or 60% (flat). Available in a variety of materials. | 316 Stainless Steel grating top clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C200SM (bottom clip), & C301SM (bolt and nut). All grating products. |
Material | Hot Dip Galvanised, Mild steel (untreated) | Stainless Steel 304 | Hot Dip Galvanised, Mild Steel | Stainless Steel 304 | Hot Dip Galvanised, Mild steel (untreated) | Stainless Steel | Mild Steel | Galvanised Steel | Mild Steel | Galvanised Steel, Mild Steel, Stainless Steel 316 | FRP | Hot Dip Galvanised, Mild Steel, Mild Steel (Flattened) | Stainless Steel 316 |