Availability | Available on backorder, typically 14 days. | Available on back order, typically 5 working days | 37 in stock (can be backordered) | | | | | Available on backorder, typically 5 working days |
Content | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Torx driver bit. Suitable for use in a standard 3/8 bit holder. Part of the Monowills Link modular railing system from Webforge. All handrails products. | Webforge Locker 206 is a fine grade mild steel (untreated) expanded metal sheet with a total open area in the range of 60-68%. | Webforge Locker 1220 is a general purpose expanded metal sheet with mesh openings of approximately 22 x 9mm and an open area in the range of 64-71% (raised) or 62% (flattened). Available in a range of materials. | Webforge Locker 2520 is a general purpose expanded metal sheet with mesh openings of approximately 48 x 19mm and a total open area in the range 73-80% (raised) and 70% (flattened). Available in a variety of materials. | Webforge A403 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. Available in aluminium (mill finish) and mild steel (untreated or hot dip galvanised), with a plain or serrated surface. | Webforge Locker 220 is a fine grade mild steel expanded metal sheet, with a total open area in the range 50-59%. | Webforge Locker A505 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods respectively. Available in Untreated (mild steel) with a plain surface. |