Description | Mild Steel grating top clip suitable for use on grating patterns A through to F. All grating products. | | | | 316 Stainless Steel grating bottom clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C100SM (top clip), & C301SM (bolt and nut). | Stainless Steel grating clipset suitable for use on grating patterns A through to F,(Set consists of Stainless Top, Bottom, and 65x8mm bolt). | |
Content | Mild Steel grating top clip suitable for use on grating patterns A through to F. All grating products. | Webforge Locker 0916 is a general purpose expanded metal sheet with mesh openings of approximately 19 x 5mm and a total open area in the range 48-56% (raised) and 53% (flattened). Available in a range of materials. | Webforge Locker A405 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods respectively. Available in aluminium (mill finish) or mild steel with an untreated or hot dip galvanised finish and a choice of surface finishes. | Webforge Locker 3830 is a general purpose expanded metal sheet with mesh openings of approximately 62 x 28mm and a total open area in the range of 83% (flat) and 76-81% (raised). Available in a mild steel (untreated) and mild steel (untreated) flattened. | 316 Stainless Steel grating bottom clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C100SM (top clip), & C301SM (bolt and nut). All grating products. | Stainless Steel grating clipset suitable for use on grating patterns A through to F,(Set consists of Stainless Top, Bottom, and 65x8mm bolt). | Webforge Locker Gridwalk WK4514 is expanded metal walkway with mesh openings of 96 x 32mm. A range of sheet sizes are available, as well as your choice of mild steel (untreated) or hot dip galvanised finish. |