Description | | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. | | | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Mild Steel grating clipset suitable for use on grating patterns A through to F, (Set consists of Top, Bottom, and 65x8mm bolt with nyloc nut). | |
Content | Webforge A323 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. All grating products. | Webforge Locker Architectural wire mesh sheet with 35mm openings and 4mm diameter wire. | Gripspan planks are the superior choice for walkways and platforms. They are lightweight, with exceptional spanning capability, whilst also being non-slip. They also pass the 15mm ball test set under AS1657 making them the ideal choice for overhead use. This plank is 5.8m long, galvanised and available in a 1.2mm thickness, 225mm wide with a serrated surface. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Mild Steel grating clipset suitable for use on grating patterns A through to F, (Set consists of Top, Bottom, and 65x8mm bolt with nyloc nut). | Monowills LINK platform stanchion, fully assembled in galvanised steel, available as std drill or drilled one side only, a kickplate mounting bracket can also be added if required. All handrails products. |