Description | | | 3820F Mild Steel (untreated) flattened, 2400 (LWM) x 1200mm (SWM) Sheet. | Stainless Steel grating clipset suitable for use on grating patterns A through to F,(Set consists of Stainless Top, Bottom, and 65x8mm bolt). | | | 217F is a fine grade, mild steel (untreated) flattened expanded metal, 1200 (LWM) x 2400mm (SWM) sheet. | | | | A655 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods respectively. Available in Untreated (mild steel) with a plain surface. |
Content | Webforge A253 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in an Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker 3820F is a flattened general purpose expanded metal sheet with mesh openings of approximately 62 x 28mm and a total open area of 83%. | Stainless Steel grating clipset suitable for use on grating patterns A through to F,(Set consists of Stainless Top, Bottom, and 65x8mm bolt). | Webforge A323 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Mild steel pipe, available in an untreated or a galvanised finish, suitable for use as a mid-rail with all monowill stanchions, available in a 6.5m length. All handrails products. | Webforge Locker 217F is a fine grade mild steel (untreated) flattened expanded metal, 1200 (LWM) x 2400mm (SWM) sheet. | Gripspan planks are the superior choice for walkways and platforms. Lightweight, exceptional spanning, non slip. Passes the 15mm ball test in AS1657 for overhead use. | Rail bends in mild steel, available in an untreated or a galvanised steel finish, as well as a range of angles to suit the specifications of your job (Bends can be used in conjunction with Webforge Monowills stanchions). | Webforge Locker, Gridwalk WK3414 is expanded metal walkway with mesh openings of 85 x 24mm. Available in mild steel (untreated) or a hot dip galvanised finish, as well as a range of sheet sizes. | Webforge Locker A655 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods respectively. Available in Untreated (mild steel) with a plain surface. |