Content | A255 is a walkway grating with spacing’s of 30 x 100mm c/c on loadbars and crossrods. These panels are available in aluminium and mild steel untreated or a hot dip galvanised finish with a plain or serrated surface. | Webforge Locker MET is a general purpose expanded metal trim. Available in a range of gap sizes, to suit your expanded profile. | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker 1220 is a general purpose expanded metal sheet with mesh openings of approximately 22 x 9mm and an open area in the range of 64-71% (raised) or 62% (flattened). Available in a range of materials. | Webforge C205 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in mild steel (untreated) and a hot dipped galvanised finish with a plain surface. All grating products. | Rail bends in mild steel, available in an untreated or a galvanised steel finish, as well as a range of angles to suit the specifications of your job (Bends can be used as a top rail with Webforge Locker Monowills Welded and as both top and mid rail with the 32NB LINK stanchions). | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in an Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker C255 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an aluminium mill finish with a plain surface and in mild steel with a plain or serrated surface in an untreated of a hot dip galvanised finish. All grating products. |