Description | | | LV16 is an expanded aluminium louvre sheet, 2400 (LWM) x 1200mm (SWM) Sheet. | | | | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. | | | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Mild Steel grating clipset suitable for use on grating patterns A through to F, (Set consists of Top, Bottom, and 65x8mm bolt with nyloc nut). | |
Content | Webforge Locker C405 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Platform stanchion in mild steel, available in an untreated or hot dip galvanised finish. As well as a range of drilling options and/or with a single slot kickplate bracket, at differing heights and orientation to suit the specifications of your job.. All handrails products. | Webforge Locker LV16 is an expanded metal louvre sheet, commonly used for sun screening. Louvre openings are approximately 33 x 4mm and a total open area in the range 12-60%. | Side Angle Right stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | Webforge Locker F255 is a walkway grating with spacings of 60 x 50mm c/c on loadbars and crossrods. These Mild Steel panels are available in an Untreated or Hot Dip Galvanised finish with a plain surface. All grating products. | Monowills LINK side conveyor stanchion, fully assembled in galvanised steel, supplied as a std drill or one side only, also available with a kickplate mounting bracket if required. All handrails products. | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with products beginning WK25 and WK34 | Webforge A323 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG. All grating products. | Webforge Locker Architectural wire mesh sheet with 35mm openings and 4mm diameter wire. | Gripspan planks are the superior choice for walkways and platforms. They are lightweight, with exceptional spanning capability, whilst also being non-slip. They also pass the 15mm ball test set under AS1657 making them the ideal choice for overhead use. This plank is 5.8m long, galvanised and available in a 1.2mm thickness, 225mm wide with a serrated surface. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Mild Steel grating clipset suitable for use on grating patterns A through to F, (Set consists of Top, Bottom, and 65x8mm bolt with nyloc nut). | Monowills LINK platform stanchion, fully assembled in galvanised steel, available as std drill or drilled one side only, a kickplate mounting bracket can also be added if required. All handrails products. |