Description | Stainless steel grating screw and bolt suitable for use with our FRP minimesh panels, to be used in conjunction with and a C139SM Top Clip | | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results in 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | | Mild steel pipe, available a galvanised finish, suitable for use with the Monowills Link ML40, available in a 6.5m length. All Handrails products. | | | | | | 0.56mm Stainless Steel 304 wire and 1.8mm openings. Roll is 1520mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | | |
Content | Stainless steel grating screw and bolt suitable for use with our FRP minimesh panels, to be used in conjunction with and a C139SM Top Clip | Angle closure bends in mild steel, available in an untreated or galvanised finish. as well as a range of angles to suit the specifications of your job (Bends can be used in conjunction with Webforge Monowills stanchions to achieve the incline required). | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | Webforge Locker 1516 is a general purpose expanded metal sheet with mesh openings of approximately 30 x 13mm and a total open area in the range 68-78% (raised) and 65% (flattened). | Mild steel pipe, available a galvanised finish, suitable for use with the Monowills Link ML40, available in a 6.5m length. All Handrails products. | Webforge A325 is a walkway grating with spacing’s of 30 x 100mm c/c on loadbars and crossrods. These panels are available in aluminium and mild steel untreated or a hot dip galvanised finish with a plain or serrated surface. | Webforge Locker 1520 is a general purpose expanded metal sheet with mesh openings of approximately 29 x 12mm and a total open area in the range 68-74% (raised) or 60% (flat). Available in a variety of materials. | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range of 66% (flat) and 67-74% (raised). Available in a range of different options to suit the needs of your project. | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Webforge Locker, Gridwalk WK3414 is expanded metal walkway with mesh openings of 85 x 24mm. Available in mild steel (untreated) or a hot dip galvanised finish, as well as a range of sheet sizes. | Webforge Locker fine woven wire mesh with 0.56mm Stainless Steel 304 wire and 1.8mm openings. Roll is 1520mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker C405 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. These Mild Steel panels are available in an untreated or a hot dip galvanised finish with a plain surface. All grating products. | Webforge Locker, Gridwalk WK3028 is a heavy duty expanded metal walkway with mesh openings of 50 x 12mm. Available in a 1200 (LWM) x 3000mm (SWM) sheet, in a mild steel (untreated) or a hot dip galvanised finish. |
Material | Stainless Steel 316 | Galvanised Steel, Mild steel (untreated) | FRP | Mild Steel, Mild Steel (Flattened) | Galvanised Steel | Aluminium, Mild Steel | Hot Dip Galvanised, Mild Steel, Mild Steel (Flattened) | Hot Dip Galvanised, Hot Dip Galvanised (Flattened), Mild Steel, Mild Steel (Flattened) | Mild Steel | Hot Dip Galvanised, Mild steel (untreated) | Stainless Steel 304 | Mild Steel | Hot Dip Galvanised, Mild steel (untreated) |