Description | | Stainless Steel bolt and nut, suitable for use with the C100SM and C129SM top clip. All grating products. | | | Mild Steel grating top clip suitable for use on grating patterns A through to F. All grating products. | | | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results in 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | | 316 Stainless Steel grating top clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C200SM (bottom clip), & C301SM (bolt and nut). |
Content | Webforge Locker, Gridwalk WK3028 is a heavy duty expanded metal walkway with mesh openings of 50 x 12mm. Available in a 1200 (LWM) x 3000mm (SWM) sheet, in a mild steel (untreated) or a hot dip galvanised finish. | Stainless Steel bolt and nut, suitable for use with the C100SM and C129SM top clip. All grating products. | Webforge Locker F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated (mild steel) with a plain surface. | Webforge Locker Gridwalk WK3022 is a heavy duty expanded metal walkway with mesh openings of 53 x 15mm. Available in a mild steel (untreated) and a hot dip galvanised finish, as well as a range of sheet sizes. | Mild Steel grating top clip suitable for use on grating patterns A through to F. All grating products. | Side Offset stanchion, 110mm in mild steel, available in an untreated or hot dip galvanised finish. As well as the option of a single slot kickplate bracket at differing heights and orientation to suit the specifications of your job. All handrails products. | Webforge Locker Architectural wire mesh sheet with 25.4mm openings and 3.15mm diameter wire, available in a range of materials. | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | Webforge Locker 1520 is a general purpose expanded metal sheet with mesh openings of approximately 29 x 12mm and a total open area in the range 68-74% (raised) or 60% (flat). Available in a variety of materials. | 316 Stainless Steel grating top clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C200SM (bottom clip), & C301SM (bolt and nut). All grating products. |
Material | Hot Dip Galvanised, Mild steel (untreated) | Stainless Steel | Mild Steel | Hot Dip Galvanised, Mild steel (untreated) | Galvanised Steel | Mild Steel | Galvanised Steel, Mild Steel, Stainless Steel 316 | FRP | Hot Dip Galvanised, Mild Steel, Mild Steel (Flattened) | Stainless Steel 316 |